“美氏793A”耐候硅酮密封膠是一種中性固化的密封膠:1)不腐蝕基材;2)固化收縮率低;3)在低溫(-45°C)至高溫(+150°C)內保持一致彈性;4)柔軟抗震,耐變形;5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封. 說明: 1)施工溫度在5℃~40℃之間; 2)用兩塊布法清潔基材; 3)將膠嘴按需要的大小做45°切斷; 4)將膠打滿接縫處 5)約25分鐘結皮. 重要: 1)使用前請做材料相容性測試; 2)不用于結構性裝配或表面溫度(45°C)以上的材料; 3)不用于滲出油污或溶劑的材料. 注意: 遠離兒童! 避免接觸眼睛和皮膚! 如有接觸,請用水沖洗;仍然不適的請就醫檢查. 執行標準:GB/T14683-2003 保質期:7個月(<24℃)   “MEISHI793A” Weather proofing silicone sealant is a neutral cure  silicone sealant:1)Not corrosion to the materials;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+150℃) temperatures; 4)High grade soft,be able to bear oscillation; 5)Suitable for glass,aluminum  material,stone,concrete,brick,ceramic,plastic,non-structural sealing. DIRECTIONS: 1)Construcation applycabie between 5℃~40℃; 2)Substrates should be solvent cleaned using two clothes method; 3)Cut the nozzle to desired opening at 45°angle ; 4)Fill the joint completely; 5)Formation of skin in 25 minutes. IMPORTANT: 1)Please do material compatibility testing before use； 2)Do not use in structural applications or where surface temperatures exceed 45℃ for materialsafety; 3)Incompatible oozing out oily or solvents. PRECAUTIONS: Keep out of the reach of children! Avoid contact with eyes and skin! In case of contact,flush with lot water;If still indisposed,consult a doctor. STANDARS: GB/T14683-2003. DURABILITY: 7 Months(<24℃).