福爾斯特F371B玻璃直線斜邊磨邊機（11磨頭） 機器簡介 1、該機用于平板玻璃直線斜邊的粗精磨，拋光和底邊的磨削。 2、傳送帶采用滾動軸承結構，軸承采用加厚型軸承，玻璃加工時摩擦力小，傳送更加平穩(wěn)。可在本機上自磨后板，使之長久保持高精度。 3、分別裝有自動和手動供油系統(tǒng)，使整機能保持在良好的潤滑條件下工作，運行更穩(wěn)定。 4、前后導軌上可加裝夾板清洗機，用于磨削過程中前后傳送板的清洗。 5、電器控制系統(tǒng)采用進口電器元件，運用PLC進行自動和手動控制，人機界面顯示被加工玻璃的厚度、斜邊角度、斜邊寬度及底邊的剩余厚度等參數。 6、采用變頻器無級變速控制加工速度。   1、This machine used for flat glass linear hypotenuse of rough finishing grinding, polishing and grinding hemline. 2、The conveyor belt rolling bearing structure,bearings all adopt supper warming bearing, glass process friction small, sending more smoothly. In this since after grinding on board, to keep the high precision. 3、To be equipped with automatic and manual respectively fuel supply system, so the can keep in good lubrication under the working conditions, running more stable. Before and after the guide rail can add splint cleaning machine, used for grinding process transfer board before and after cleaning. Electric control system adopts imported electrical components。 4、using PLC for automatic and manual control, man-machine interface display the thickness of the glass processing, beveling Angle, beveling width and thickness of bottom remaining parameters. 5、 Based on frequency stepless speed control processing speed.   主要技術參數 速度范圍Speed range--------------------0.4-7 m/min 斜邊角度Beveling angle-----------------3°- 45° 加工較大斜邊寬度Max beveling width-----60mm 加工較小玻璃尺寸Min glass size---------20*20 mm 加工玻璃厚度Glass thickness------------3-19 m 總功率Total power----------------------27.32 kw 設備尺寸Unit size----------------------8.25*1.51*2.75 M (L*W*H) 總重量Total weight---------------------7200 kg   福爾斯特定制部件