CGYX1321廣東辰鋼玻璃異形磨邊機  周經理 ●適用于加工圓形、橢圓形及異形玻璃圓邊、鴨咀邊、方邊、斜邊的磨削、拋光。 ●采用真空泵將玻璃吸附在吸盤上，配電機驅動衛星轉盤旋轉，轉盤旋轉速度可在工作時任意調速；●可安裝三個磨輪進行粗、精磨和拋光。磨削斜邊時，安裝碗形磨輪，將磨頭向后傾斜，調節斜面角度，以端面磨削。   ●Suitable for grinding and polishing the outer edge with rounded or duckbilled shape for circle, oval and irregular flat glass. ●The processed glass is adsorbed onto a vacuum sucker, a spinning disc or an independent satellite disc, the speed of the spinning disc is adjustable. ●When grinding peripheries, coarse grinding, refine grinding and polishing are alternatively done by three grinders. when grinding hypotenuses, the angle of the grinder on the bowel-shape wheel can be obliquely adjusted to fit the ground angle for grinding.   技術參數： 玻璃加工厚度 3～21mm 玻璃回轉直徑 100mm～2100mm 斜邊角度 0°～20° 較大斜邊寬 35mm 工作臺轉速 0.8～4r/min 獨立轉盤轉速 1.2～6r/min 總功率 2.6KW 總重量 1000kg 外形尺寸 1300mm×1300mm×1700mm