福爾斯特FSBM4222/2522玻璃直線雙邊磨邊機（單邊11磨頭）  機器簡介 用于磨削各種規格的平板玻璃。加工玻璃的直線平底邊，前后倒角，垂直邊夾角和拋光一次完成。拋光系統采用氣動和手動雙機構，工作性能穩定，保證玻璃底邊及前后倒角的光潔度。傳送系統采用蝸輪減速機同步傳動，同步性較好。分別裝有自動和手動供油系統，使整機能保持在良好的潤滑條件下工作，使用壽命更長。電器控制系統采用進口電器元件，運用PLC進行自動和手動控制，人機界面顯示被加工玻璃的寬度，厚度及傳送速度等參數。特別適用于磨削大片，長片夾層玻璃及大批量規?；桨宀Ａ?。 The machine is suitable for grinding varies size of flat glass.Grinding two parallel edges,front and rear polishing can be finished at one pass.Polishing applies pneumatic and manual double system ,which has more stable performance to ensure the brightness of glass bottom edge and arris.Conveyor system adopt worm-drive reduce speed with good synchronism.Auto and manual oil supply system are equipped to guarantee machine working under a good lubrication condition to increase stability.Apply PLC control auto/manual program,HMI display data of glass thickness,width and running speed .The machine is used for processing large and long inter-layer glass and large scale flate glass production. 主要技術參數 MAJOR TECHNICAL PARAMETERS   速度范圍 Speed range ---------------------------0.5-6 m/min     底邊較大磨削量 Max.grinding width----------6 mm (單邊)     棱角較大磨削寬度 Max.arris grinding width--3 mm (單邊)     加工較小玻璃尺寸 Min.glass size---------------250*250 mm     加工玻璃厚度 Glass thickness--------------------3-30 mm     總功率 Total power---------------------------------53.34 Kw     設備尺寸 Overall dimension-----------------------5.5*5.4*1.75 M (L*W*H)     總重量 Total weight---------------------------------7500 Kg